Ferrous Crete is a leading manufacturer of Polymer modified adhesives in India. The company is primarily located in Faridabad, Haryana.

© Copyright Ferrous Crete 2019
ferrous

FERRO – 201 AQUA PLUS SEALER (STONE SEALER)

Ferro – 201 Sealer is new technology water repellent transparent sealer offering superior performance and VOC compliance. It offers fast – beading water repellency for porous concrete bricks, stone and grout. It is water based, it is easy to apply and provides a breathable dirt and water repellency for the protection of concrete surface. It will seal the surface and not change the colour of the surface. It is ideal for use in green building.

CATEGORY: Sealers

  • Description

    APPICATIONS

    Use on vertical and horizontal surfaces, Concrete drive way and side wall’s, granite natural lime, brick and natural sand stone.

    ADVANTAGES
    • Good depth of Penetration
    • Resistance to alkali’s
    • Rapid development of water repellency
    • Provides good adhesion for cement and adhesive
    • Water based and environmentally friendly
    • Easy to use

  • Technical Data

    Test Unit Approx.Result
    Colour – Milky White
    Non Volatile Content Approx % 5
    PH Approx. % 5 to 6
    Flash Point Approx. ºC >100/td>
    Density Approx. lb/gel 8.216
    VOC Content Approx. g / L >300
    Specific Gravity at 25ºC Approx. – 0.988
    Solvent – Water

  • Additional Information

    • Pack Size : 5 ltr.

  • PRODUCT MIXING AND APPLICATION

    • Test a small unobtrusive area before coating entire surface
    • Stir well before use
    • Apply to penetrate 20 to 30 minutes
    • Mostly one coat is sufficient
    • More porus surface should have two applications
    • Apply second coat absorbent surface 30 to 40 minutes after first coat
    • Remove excess sealers from surface
    • Allow sealer to cure for 48 hours
    edx
Related Products