Application :
For fixing all types of tiles on interior & exterior use like external wall /floor / kitchen / bathroom wall /corridor / lobby /meeting rooms /halls etc.
Mixing :
Add clean water to Ferro-1111 and mix thoroughly until a slump free mortar is obtained. A 20kgs bag will required approximately 4-6 Ltrs. of water. The adhesive is immediately ready for use and has a pot life of 1.5- 2 Hrs. no further water should be added.
1. Spread no more than 1 sq.m at a time apply the adhesive to the wall or floor surfaces
2. Press the tiles firmly in to position with a slight twisting action checking periodical that good contact is .
maintained with the back of each tile leave no voids behind tiles when solid bed fixing
3. Tiles should be fixed within 20 minutes of adhesive being applied depending on the porosity of the
surface and atmospheric conditions. Tiles can be adjusted up to 10-15 minutes after fixing
4. Leave adequate joints between individual wall and floor tiles unless self spacing tiles are used
5. Clean off surplus adhesive from the tiles face and between joints
6. Do not use in damp conditions
Coverage :
Notched Trowel Per Sq. Mtr.
3 x 3 mm App. 2.3Kg
6 x 6 mm App. 5Kg
8 x 8 mm App. 5.9Kg
10 x 10 mm App. 6.8Kg
Colour : Gray
Pack Size : 20 Kgs.
